The information displayed in the first part is merely descriptive and shows previously assigned data:
•Code: the path of the resource that you are editing is displayed
•Type: shows the resource type
•Number: indicates the ordinal number that identifies that resource in case others of the same type coexist.
The user must enter the following information:
•Name: description of the resource you are editing.
•Driver: fixed for the machine type: LMS
•GPI Input: specify both the GPI of the INGEST PC's Input card to detect the LMS start and whether the signal is positive or negative (default value: positive).
Serial connection wire:
The Sony Flexicart communicates via a standard RS422 interface using a standard cable. The cable is a DB9 (male) to DB9 (male); all connections are pin-to-pin.
DB9 (male) Communication - DB9 (male) Flexicart
TX + 8 8 RX+
TX – 3 3 RX-
RX + 2 2 TX+
RX - 7 7 TX-
NB.
The output Gpi the LMS uses to indicate that the tape start point has been reached is fixed to 1; in the db 37 (LMS side), this corresponds to pins 22 and 18.
(LMS is an open collector, and the GPI card is in the 'fed' configuration)
---------------------------------------------------------------------------------------
EXTERNAL PULSE
BEFORE BREAK ==> 03:00 ( SS: FF )
BEFORE LOGO ==> 02:00 ( SS: FF )
FOR GENERAL PURPOSE 1 BASE ==> S ( S = SOM, E = EOM)
TIME ==> +00:08 ( [+-]SS:FF )
FOR GENERAL PURPOSE 2 BASE ==> S ( S = SOM, E = EOM)
TIME ==> -00:04 ( [+-]SS:FF )
DEFAULT EXTERNAL PULSE BREAK LOGO G.P.1 G.P.2
BREAK EVENT ==> N - N N
LOGO EVENT ==> - N N N
COMMERCIAL EVENT ==> - - N N
PROGRAM EVENT ( MULTI SEG. CASS. ) ==> - - N N
( Y = ON, N = OFF )
LMS resource editor - User
After indicating the user and program for which the resource must be activated, it is necessary to set other data:
Port com setting:
•Indicate the number of a used port com.
•Com data are fixed: 38400, E,8,1