The information displayed in the first part is merely descriptive and shows previously assigned data:
•Code: the path of the resource that you are editing is displayed
•Type: shows the resource type
•Number: indicates the ordinal number that identifies that resource in case others of the same type coexist
The user must enter the following information:
•Name: Description of the resource you are editing.
•Driver: Fixed NETWORK
•Model: Choose the model among the available ones
•Address: Indicate the router address (the default one is 0)
Serial connection wire:
PC side Router side
DB9F DB9M
2 Rx ------------ Tx 2
3 Tx ------------ Rx 3
5 GND ------------- GND 5
A0808 / A1616 Resource Editor - User
After indicating which user and which software the resource has to be installed for, you have to set other data:
Com port setting:
The device can be controlled directly through a serial connection (in this case, you have to set the com number) or through UDP with the ETERESARVAJI software (in this case, you have to indicate the IP address of the PC that EtereSarvaji runs on and the Local Port which EtereSarvaji uses.
Com configuration:
The com is configured in a fixed way with the following parameters:
•Baud: 9600
•Parity: None
•Stop bits: 1
•Data bits: 8