The information displayed in the first part is merely descriptive and shows previously assigned data:
•Code: The path of the resource that you are editing is displayed
•Type: Shows the resource type
•Number: Indicates the ordinal number that identifies that resource in case others of the same type coexist.
The user must enter the following information:
•Name: Description of the resource you are editing.
•Driver: Fixed for the machine type, NEVERLOGO
•IP address: IP address of the NEVER LOGO and its Local Port.
•Configuration:
✓ The logo generator is configured as follows: Indicate how the logo must be configured.
✓Enter the connected DSK: Indicate whether the DSK is internal (INSIDE) or if one of those in the resources (previously configured) must be connected.
(Warning: you need to configure DSKs first because only installed DSKs are displayed)
•Preset/Take Mode: Some devices can pre-load the logo before sending it ON AIR in such a way as to speed up the operation at the moment of the take. This possibility can be exploited using preset/take mode instead of standard mode. The preset/take mode is suggested only if a commutation is used for each event. Otherwise, the results could be unpredictable.
Resource Editor - User
Indicate which user and which software the resource has to be installed for.