After indicating which user and which software the resource has to be installed for, you have to set other data:
Com port setting:
The DISPLAY can be controlled directly through a serial connection (in this case you have to set the com number), or through UDP with the ETERESARVAJI software (in this case you have to indicate the IP address of the PC that EtereSarvaji runs on and the Local Port EtereSarvaji uses.
422
•Device (out)- Indicate the no. of the device to be installed when you open the resource.(-1=not installed)
•Controller (in)- Indicate the no. of the controller to be installed when you open the resource.(-1=not installed)
(Only in the special case where you have a centralized video router which allows you to also commute serial ports, set the data referred to above to 422)