The information displayed in the first part is purely descriptive and shows data previously assigned:
•Code: The resource path that one is editing is displayed
•Type: Shows the type of resource
•Number: Indicates the ordinal number that identifies that resource in case others of the same type are present
The user must insert the following information:
•Name: Description of the resource that one is editing
•Driver: IRONMASTER allows one to manage two layers; in the resource tree, two layers that must be activated will be created.
•Configuration:
Logo Generator configured as:
✓Indicate how the logo must be configured (by default, don't indicate anything)
✓Indicate the associated DSK. Indicate if the DSK is internal (INSIDE) or if one of the resources, previously configured, must be associated. (Attention, only the active DSK are displayed, for which it is necessary to have first configured the DSK
✓Modality Preset/Take: Some devices can load the logo before putting it on air in such a way as to speed up the operation at the moment of the take. One can use this opportunity in preset/take mode instead of standard mode. The preset/take mode is advisable only when using a switch for every event; otherwise, the results could be unpredictable (by default, set this parameter).
Further information:
✓The layer 1 of the logo is always associated with the dsk 4 of the master control
✓The layer 2 of the logo is always associated to the dsk 6 of the master control
The protocol doesn't provide a command to download a logo from a layer. Therefore, when the driver does "logo off", call the logo 999, which will be set as a logo on the master control.
Axon resource editor - User
Indicate for which user and for which program the resource must be enabled.