The information displayed in the first part is merely descriptive and shows previously assigned data:
•Code: The path of the resource that you are editing is displayed
•Type: Shows the resource type
•Number: Indicates the ordinal number that identifies that resource in case others of the same type coexist. The user must enter the following information:
•Name: Description of the resource you are editing.
•Driver: Fixed for the machine type: GVM21
•Poll address: Default value 8281
•Select address: Default value 8280
•Transaction speed (Slow, Medium, Fast, Input time of three transaction speeds in msec.)
•Number of channels: Specify how many input channels there are; the output channel is one. This information is used to edit the channels in the Main
Serial connection wire: SMPTE 207 (SONY standard)
MC 21 Resource Editor - User
After indicating which user and which software the resource has to be installed for, you have to set other data:
Com Port Setting:
The machine can be controlled directly through a serial connection (in this case, you have to set the com number) or through UDP with the ETERESARVAJI software (in this case, you have to indicate the IP address of the PC that EtereSarvaji runs on and the Local Port which EtereSarvaji uses.
Com Configuration:
Values of the com are fixed: 38400, E,8,1
WARNING: THIS COM PORT IS NOT CONTROLLED AT PRESENT. THEREFORE, YOU CANNOT USE THE MASTER CONTROL FROM THE AUTOMATION, BUT YOU CAN READ ITS STATUS FROM THE SECOND COM PORT.
Second Com Port Setting:
MC21 has a second com port to notify its status; if you want to manage this possibility (from MAIN), configure the com; otherwise, leave the com to 0.
As for the first com, this one as well can be controlled directly through a serial connection (in this case, you have to set the com number) or through UDP with the ETERESARVAJI software (in this case, you have to indicate the IP address of the PC that EtereSarvaji runs on and the Local Port EtereSarvaji uses.
Com Configuration:
Default values are: 9600, N,8,1
422
•Device (out)- Indicate the no. of the device to be installed when you open the resource.(-1=not installed)
•Controller (in)- Indicate the no. of the controller to be installed when you open the resource.(-1=not installed)
(Only in the special case where you have a centralized video router which allows you also to commute serial ports, set the data referred to above to 422)