The information displayed in the first part is merely descriptive and shows previously assigned data:
•Code: The path of the resource that you are editing is displayed
•Type: Shows the resource type
•Number: Indicates the ordinal number that identifies that resource in case others of the same type coexist.
The user must enter the following information:
•Name: Description of the resource you are editing
•Driver: PROBELFW for the Probel Freeway, PROBELAURORA for the Probel Aurora. (The driver EtereSW is not in use any longer; it has been maintained for compatibility)
•Config: (leave blank)
•Model: Select among the listed models.
Otherwise, select GENERIC and indicate your model's number of Inputs and Outputs.
•Channel's Number: Insert the number of the router's inputs and outputs.
•Router Switching Levels: Some routers allow you to determine the switching levels, that is, to define what has to be switched (Audio only, Audio and Video, Video only, serial port, Time Code, etc.). If your router offers this option, levels can be set here. In Etere, you have three kinds of switching: AUDIO/VIDEO, SERIAL PORT, and TIMECODE and for each, you can determine the levels to be installed.
For example, if, on your router, Video corresponds to level 1 and Audio corresponds to level 2, you must activate levels 1 and 2 in the AUDIO/VIDEO box.
If the switching of a possible serial port corresponds to level 4, activate level 4 on the SERIAL PORT box
(if your router does not offer this possibility, leave all levels installed)
Nine-way 'D' type female socket connection:
PC side (RS-232) SAVIS side
PIN FUNCTION
1 ---------------------------- Chassis
2 ---------------------------- Tx -
3 ---------------------------- Rx +
4 ---------------------------- Gnd
5 ---------------------------- N/C
6 ---------------------------- GND
7 ---------------------------- Tx +
8 ---------------------------- Rx -
9 ---------------------------- Chassis
Pro-bel Freeway / Aurora Resource Editor - User
After indicating which user and which software the resource has to be installed for, you have to set other data:
Com Port Setting:
The router can be controlled directly through a serial connection (in this case, you have to set the com number) or through UDP with the ETERESARVAJI software (in this case, you have to indicate the IP address of the PC that EtereSarvaji runs on and the Local Port which EtereSarvaji uses).
Com Configuration:
You could only variate Bauds between 38400 (default), 9600, or 19200:
Baud: 38400
Parity: None
Stop bits: 1
Data bits: 8
Backup Router
If you wish to manage another router as the Backup router, activate this option, insert com data, or leave the option blank.
The backup router must be completely THE SAME as the main one.
Rights
The router should always be configured as Master; configure it as Slave just in case it belongs to an Open Master Control.