The information displayed in the first part is merely descriptive and shows previously assigned data:
•Code: the path of the resource that you are editing is displayed
•Type: shows the resource type
•Number: indicates the ordinal number that identifies that resource in case others of the same type coexist.
The user must enter the following information:
•Name: description of the resource you are editing.
•Driver: choose between GVM2100 and GVM2100B .
(The driver GVM2100B allows you to run preset of the desk and the background contemporaneously with the background take.)
•Config: indicate the transition speed in msec. (values available 500, 1000, 2000)
•Transaction speed: (Slow, Medium, Fast, Input time of three transaction speeds in msec.)
•Number of channels: specify how many input channels there are; the output channel is one. This information is used to edit the channels in the Main
NOTICE: When creating this resource, 5 DSK resources connected to the MC2100 will be automatically created, too, to be appropriately configured.
NB: The device driver supports up to 15 input channels. This limitation is removed from Etere released version EtereInstall_31.1.326.4079.zip onwards.
•Serial connection wire: SMPTE 207 (SONY standard)
MC 2100 resource editor - User
After indicating which user and which software the resource has to be installed for, you have to set other data:
Com port setting:
The machine can be controlled directly through a serial connection (in this case, you have to set the com number) or through UDP with the ETERESARVAJI software (in this case, you have to indicate the IP address of the PC that EtereSarvaji runs on and the Local Port which EtereSarvaji uses.
Com configuration:
The com. data are fixed: 38400, N,8,1
Second com port setting:
MC2100 has a second com port to notify its status (TALLY port); if you want to manage this possibility (from MAIN), configure the com; otherwise, leave it to 0.
As for the first com, this one can also be controlled directly through a serial connection (in this case, you have to set the com number) or through UDP with the ETERESARVAJI software (in this case, you have to indicate the IP address of the PC EtereSarvaji runs on and the Local Port EtereSarvaji uses.
Com configuration:
Values of the second com are fixed: 38400, N,8,1
422
•Device (out) - Indicate the no. of the device to be installed when you open the resource. (-1=not installed)
•Controller (in) - Indicate the no. of the controller to be installed when you open the resource.(-1=not installed)
(Only in the particular case where you have a centralized video router which allows you also to commute serial ports, set the data referred to above to 422)