The information displayed in the first part is merely descriptive and shows previously assigned data:
•Code, the path of the resource that you are editing is displayed
•Type, shows the resource type
•Number indicates the ordinal number that identifies that resource in case others of the same type coexist.
The user must enter the following information:
•Name description of the resource you are editing.
•Driver: enter the device driver's name, "CHYRONCB" or "CHYRONHEGOPRIME", for prime inspot LOGO.
•IP address, IP address of the LOGO and its Local Port.
•Configuration:
Logo generator configured as:
✓Indicate the way the logo has to be configured.
✓Enter the connected DSK:
✓Indicate whether the DSK is internal (INSIDE) or if one of those in the resources (previously configured) must be connected.
✓(Warning: you need to configure DSKs first, because only installed DSKs are displayed)
•Preset/Take Mode: Some devices can pre-load the logo before sending it ON AIR in such a way as to speed up the operation at the moment of the take. This possibility can be exploited using preset/take mode instead of standard mode. The preset/take mode is suggested only if a commutation is used for each event. Otherwise, the results could be unpredictable.
Chyron Resource Editor - User
Indicate which user and which software the resource has to be installed for.