The information displayed in the first part is purely descriptive and shows data previously assigned:
•Code: The resource path that one is editing is displayed.
•Type: Shows the type of resource.
•Number: Indicates the ordinal number identifying that resource in case others of the same type are present.
The user must insert the following information
•Name: Description of the resource that one is editing
•Driver: VERTIGOXP
The device is operated via IP; it is necessary to indicate the following:
•IP Address
•Local Port
•Output channel: (Default= 'A')
•Configuration:
✓Logo Generator configured as Indicate how the logo must be configured (by default, don't indicate anything)
✓Indicate the associated DSK: Indicate if the DSK is internal (INSIDE) or one of the resources, previously configured, must be associated
(Attention: only the active DSK are displayed, for which it is necessary to have first configured the DSK.
•Modality Preset/Take: Some devices can load the logo before putting it on air in such a way as to speed up the operation at the moment of the take. One can use this opportunity in preset/take mode instead of standard mode. The preset/take mode is advisable only when one uses a switching for every event. Otherwise, the results could be unpredictable (by default, set this parameter).
Further information:
✓It is a series of applications for graphics and subtitling.
✓Etere connects to the module XPlay via TCP/IP on the port specified in the module XPlay.
✓There's only one parameter (optional) that is set by the resources: the output channel (value of string type). The driver uses the default 'A' if it is not specified.
Vertigo Resource Editor - User
Enter topic text here.