The information displayed in the first part is merely descriptive and shows previously assigned data:
•Code: The path of the resource that you are editing is displayed
•Type: Shows the resource type
•Number: Indicates the ordinal number that identifies that resource in case others of the same type coexist.
The user must enter the following information:
•Name: Description of the resource you are editing.
•Driver: Fixed for the machine type, GENCG
•Configuration:
✓ The logo generator is configured as follows: Indicate how the logo must be configured.
✓Enter the connected DSK: Indicate whether the DSK is internal (INSIDE) or if one of those in the resources (previously configured) must be connected.
(Warning: you need to configure DSKs first because only installed DSKs are displayed)
•Preset/Take Mode: Some devices can pre-load the logo before sending it ON AIR in such a way as to speed up the operation at the moment of the take. This possibility can be exploited using preset/take mode instead of standard mode. The preset/take mode is suggested only if a commutation is used for each event. Otherwise, the results could be unpredictable.
Compix Media resource editor - User
After indicating which user and which software the resource has to be installed for, you have to set other data:
Com port setting:
The subtitler can be controlled directly through a serial connection (in this case, you have to set the com number) or through UDP with the ETERESARVAJI software (in this case, you have to indicate the IP address of the PC that EtereSarvaji runs on and the Local Port EtereSarvaji which uses.
Com Configuration:
The default data is:
Baud: 9600
Parity: None
Stop bits: 1
Data bits: 8
422:
Device (out)- Indicate the no. of the device to be installed when you open the resource.(-1=not installed)
Controller (in)- Indicate the no. of the controller to be installed when you open the resource. (-1=not installed)
(Only in the special case where you have a centralized video router which allows you also to commute serial ports, set the data referred to above to 422)