After indicating which user and which software the resource has to be installed for, you have to set other data:
Com port setting:
The device can be controlled directly through a serial connection (in this case you have to set the com number), or through UDP with the ETERESARVAJI software (in this case you have to indicate the IP address of the PC that EtereSarvaji runs on and the Local Port that EtereSarvaji uses).
Com configuration:
The Baudrate only can be set (default value 9600); other parameters are fixed.
Attention: Baudrate depends on the dip switch settings placed inside the router.
•Baud : 9600
•Parity : None
•Stop bits: 1
•Data bits: 8
The router has some jumpers inside to set if the com and the Baudrate must be used as 232 or 422.
To operate with Etere it must be set as 422, and the Baudrate must be 9600.
(See the video router guide for settings)