The information displayed in the first part is merely descriptive and shows previously assigned data:
•Code: The path of the resource that you are editing is displayed
•Type: Shows the resource type
•Number: Indicates the ordinal number that identifies that resource in case others of the same type coexist.
The user must enter the following information:
•Name: Description of the resource you are editing.
•Driver: Choose:
✓GVM2100 - if the dsk is a Grass Valley one
✓GVM2100B - if the dsk is a Grass Valley one ( preset of the dsk and the background contemporaneously with the take of the background.)
✓OPENMC - if the dsk is an Open Master Control one
✓MC9200 - if the dsk is a Grass Valley one
✓OXTELIS2 - if the dsk is a Oxtel one.
✓SATURN - if the dsk is a Philips one.
✓ISARA - if the dsk is a SONY one.
✓PM100 - if the dsk is an Oxtel one, connected to PresMaster
✓D9525 - if the dsk is a Evertz 9525LG
•Keyer n.: Indicate the number of the Keyer to be used (as for the Grass Valley dsk, the only choice is 0)
•Setting: Indicate how to configure the DSK in Etere; the available choices are: DSK1,DSK2,DSK3. If you do not want to configure it, leave the field blank.
If DSK inside Etere is configured as DSK1, DSK2, or DSK3, it is possible to set the Preset/Take Mode.
Preset/Take Mode: Some devices can pre-load the logo before sending it ON AIR in such a way as to speed up the operation at the moment of the take. This possibility can be exploited using preset/take mode instead of standard mode. The preset/take mode is suggested only if a commutation is used for each event. Otherwise, the results could be unpredictable.
DSK Resource Editor - User
Indicate which software the resource has to be installed for.