To see what has been recorded, you need to configure the ingest channel as made by an encoder and a decoder.
LTC
✓In the channel, you receive a Timecode signal from
✓Out: channel you transmit a Timecode signal from
Decoder
✓No.: indicates the number of the Decoder you use
Video In
✓No.: the number of the video input port associated with the channel
Encoder
✓No.: indicates the number that identifies the MPEG encoder you intend to use on the channel
✓Bitrate Select the quality in bit\sec
✓Format 422 o 420
✓GopEnd (see profile technical manual)
✓PPerl (see profile technical manual)
✓BPerlP (see profile technical manual)
Please refer to the Tektronix manual or the current literature for a complete description of the different Mpeg compression parameters.
Monitor
✓Audio Codec: indicates the number of audio codecs used for the monitor.
✓Video Out: indicates the video output channel of the monitor
✓Audio Out: indicates the first audio channel of the couple used.
IMPORTANT: Audio channels and audio codecs are always used in couples; therefore, using Audio out = 0, you use channel 0 and channel 1. Be careful with possible conflicts between audio channels (e.g., if you use Audio Out 0 on channel 0, you cannot use Audio Out 2 on channel 1).
✓Video Out: indicates the video channel output channel
✓Audio Codec: indicates the number of audio codecs used on the channel.
✓Audio Out: indicates the first audio channel of the couple used. IMPORTANT: Audio channels are always used in couples; therefore, using Audio out = 0, you use channel 0 and channel 1. Be careful with possible conflicts between audio channels (e.g., if you use Audio Out 0 on channel 0, you cannot use Audio Out 2 on channel 1).
Attention: the value -1 indicates the channel\codec is not used.