LTC
✓In the channel, you receive a Timecode signal from
✓Out: channel you transmit a Timecode signal from
Video Codec
✓No.: indicates the Codec number used for the selected channel
✓Byte\Fields: allows you to set the video reproduction quality expressed in Byte/Field.
The following table shows the video Compression (Motion JPEG) \ Quality correspondence
Byte\Field Mb/sec Compression Quality
120.000 48 4 :1 Digital Betacam
90.000 36 6 :1 D2
60.000 24 8 :1 Betacam SP
45.000 18 12 :1
30.000 12 16 :1 S-VHS
(These values are just an indication)
Video In
✓No.: number of the video input port associated with the channel
✓Shared: to enable sharing this video input channel for several Codec. This option is validated by default.
Monitor
✓Video Out indicates the video output channel of the monitor
✓AudioCodec indicates the number of audio Codec used for the monitor.
✓Audio Out indicates the first audio channel of the couple used.
IMPORTANT: Audio channels are always used in couples; therefore, using Audio out = 0, you use channel 0 and channel 1. Be careful with possible conflicts between audio channels (e.g., if you use Audio Out 0 on channel 0, you cannot use Audio Out 2 on channel 1).
✓Video Out indicates the video channel output channel
✓Audio Codec indicates the number of audio Codec used on the channel.
✓Audio Out indicates the first audio channel of the couple used.
IMPORTANT: Audio channels are always used in couples; therefore, using Audio out = 0, you use channel 0 and channel 1. Be careful with possible conflicts between audio channels (e.g., if you use Audio Out 0 on channel 0, you cannot use Audio Out 2 on channel 1).
Attention: the value -1 indicates the channel\codec is not used.