The information displayed in the first part is merely descriptive and shows previously assigned data:
•Code: The path of the resource that you are editing is displayed
•Type: Shows the resource type
•Number: Indicates the ordinal number that identifies that resource in case others of the same type coexist.
The user must enter the following information:
•Name and description of the resource you are editing.
•Driver, fixed for the machine type, FORALG200
•Configuration
✓No. of ROM in the machine: enter the number of ROM in the logo, which can be 1 or 2 (default=1).
✓No. of the logo in each ROM: enter the number of logos you have in each ROM; accepted values are 1,4,8,16 (default=16)
✓No. of the first GPI the machine uses, the logo needs an output card to work. Set the no. of the first gpi used by the logo (among those available). The default value is 8.
•Configuration
< UNK> ✓logo generator is configured to Indicate how the logo has to be configured.
✓Enter the connected DSK: Indicate whether the DSK is internal (INSIDE) or if one of those in the resources (previously configured) must be connected.
(Warning: you need to configure DSKs first because only installed DSKs are displayed)
•Preset/Take Mode: Some devices can pre-load the logo before sending it ON AIR in such a way as to speed up the operation at the moment of the take. This possibility can be exploited using preset/take mode instead of standard mode. The preset/take mode is suggested only if a commutation is used for each event. Otherwise, the results could be unpredictable.
Wiring to connect FORA and the ADVANTECH PCL-725 I/O card:
PCL-725 side logo generator side DB 37 M DB 15 M
NO0 (1) ________________________ (8) D0
NO1 (4) ________________________ (9) D1
NO2 (7) ________________________ (10) D2
NO3 (20) _______________________ (11) D3
NO4 (23) _______________________ (12) D4
NO5 (25) _______________________ (13) Local/Remote
NO6 (27) _______________________ (14) On/Off
COM0 (2) _______________________ (15) GND
COM1 (5) ____|
COM2 (8) ____|
COM3 (21) ___|
COM4 (24) ___|
COM5 (26) ___|
COM6 (28) ___|
LG-200 resource editor - User
Indicate which software the resource has to be installed for.