The Wipe Transition function allows operators to apply a visual transition effect when inserting a video clip into the on-air content.
This feature works together with the Insert Clip function available in the Action section and allows the operator to define how the new clip appears during the transition.
The transition settings are managed from the Transition Control section of the CENSOR EX interface.
Configuring a Wipe Transition
To configure a wipe transition:
1. Open the Transition Control section.
2. Enable the Wipe option.
3. The Wipe Selection window is displayed.
In the Wipe Selection window, operators can configure:
• Wipe Direction: Defines the direction from which the transition is applied.
Transition Mode:
• IN: Defines the entrance transition of the inserted clip.
• OUT: Defines the exit transition of the previous content.
• Wipe Speed: Defines the transition speed by setting the number of frames per second.
After configuring the required parameters, click OK to confirm the selection.
Applying the Wipe Transition
Once the wipe effect has been configured:
1. Select the required clip.
2. Use the Insert Clip or Cut Insert Clip function.
3. The selected wipe transition is automatically applied during the clip insertion.
The configured transition is displayed in the Transition Control section using the corresponding effect indicator, allowing operators to verify the active transition settings.
Resetting a Wipe Transition
To remove an applied wipe transition:
1. Open the Transition Control section.
2. Select None.
The wipe effect is disabled and no transition will be applied to future clip insertions.